DC MACHINES BY LABVIEW AND MICROCONTROLLER AT ELECTRICAL ENGINEERING UNDERGRADUATE

Authors

  • Yuri Merizalde Zamora Universidad de Guayaquil
  • Leili López Domínguez Rivas Universidad de Guayaquil
  • Sol López Domínguez Rivas Universidad de Guayaquil

Keywords:

machine; DC; LabView; Micro controller; magnetization curve.

Abstract

In career technology, electrical engineering degree is imperative studying electrical machines such as direct current. To achieve this goal, educational institutions have laboratories where practices are performed entirely by hand. After connecting the motor or DC generator according to the type of connection to be analyzed what is done is manually varying the tension of the field windings or armatures machines then take readings or torque, speed, voltage and current read in analog instruments. In the present study an alternative to automate part of such practices, so that they are carried out more pedagogical way using modern methods for controlling an electric machine is tested. For this the variable resistor are replaced by a variable source controlled from LabView. The system analyzed consisting of eight cards, can be used to control or depth study current machine either engine, generator, engine generator set or a system of current distribution, but also the principles and applied for educational purposes techniques it can also be used for practical purposes to automate a lot of processes. At the end of study, the magnetization curve of a generator obtained using the proposed method is presented.

Author Biographies

Yuri Merizalde Zamora , Universidad de Guayaquil

Ingeniero Industrial. Universidad de Guayaquil, Ecuador; Ingeniero Eléctrico, Universidad Politécnica Salesiana, Ecuador; Master en Administración de Empresas, Universidad Politécnica Salesiana, Ecuador. Profesor de la Universidad de Guayaquil, Facultad de Matemática y Físicas, Carrera de Ingeniería en sistemas computacionales. Ecuador.

Leili López Domínguez Rivas, Universidad de Guayaquil

Universidad de Guayaquil. Facultad de Ciencias Matemáticas y Físicas, Carrera de Ingeniería en Sistemas Computacionales. Guayaquil. Ecuador.

Sol López Domínguez Rivas, Universidad de Guayaquil

Universidad de Guayaquil. Facultad de Ciencias Matemáticas y Físicas, Carrera de Ingeniería en Sistemas Computacionales. Guayaquil. Ecuador.

References

Cáceres, J., Morales. R. (2012). Automatización Del Banco Didáctico Del Laboratorio De Máquinas Eléctricas, Escuela Especializada de Ingeniería, Santa Tecla. Ecuador.

Chapman, S. (2012). MÁQUINAS ELECTRICAS, 5ta edición, McGrawHill, México.

Domínguez, I. (2015). Diseño y construcción de un banco de pruebas para generadores DC de aeronaves del Ala De Combate No 22, Universidad Politécnica Salesiana, Ecuador.

Herrera, M., Chalco, O. (2013). Construcción De Un Módulo Didáctico Para El Aprendizaje De Micro controladores Controlado Por LabView, Escuela Politécnica Nacional, Ecuador.

Muhammad H.R. (2004). Electrónica de Potencia, Tercera edición, Pearson Educación, México.

Serway, R. (2013). FÍSICA, 7ma edición, Editorial Cengage Learning, México.

Published

2016-12-02

How to Cite

Merizalde Zamora , Y. . ., López Domínguez Rivas, L., & López Domínguez Rivas, S. (2016). DC MACHINES BY LABVIEW AND MICROCONTROLLER AT ELECTRICAL ENGINEERING UNDERGRADUATE. Didáctica Y Educación ISSN 2224-2643, 7(3), 35–54. Retrieved from https://revistas.ult.edu.cu/index.php/didascalia/article/view/493

Conference Proceedings Volume

Section

Investigaciones

Most read articles by the same author(s)